Industrial Materials

Stud Bolts and Industrial Fasteners: Grades, Coatings and Selection

1 min read

Packaged fasteners and industrial materials ready for delivery

Bolting holds flanged joints and equipment together under pressure, temperature and vibration. Using the wrong grade, size or coating can lead to leaks or failures. This guide covers the essentials.

Stud bolts for flanged joints

Flanged joints in process and oil and gas piping commonly use stud bolts: threaded rods with a nut at each end. A widely used combination is ASTM A193 Grade B7 studs with ASTM A194 Grade 2H heavy hex nuts. Other grades are used for specific temperatures or services, for example B7M for some sour-service applications and stainless grades such as B8 and B8M for corrosive environments.

Hex bolts, nuts and washers

Hex bolts are used for structural connections and equipment. Washers spread the load and protect surfaces. Always match nut grade and thread to the bolt.

High-tensile and stainless fasteners

High-tensile fasteners are used where high clamping force is needed. Stainless fasteners resist corrosion and are common in marine, food and laboratory environments.

Coatings

Coatings protect against corrosion and can make removal easier during maintenance. Common options include hot-dip galvanising, zinc plating and PTFE-based coatings. The choice depends on the environment and the client's specification.

Sizing stud bolts

Stud bolt diameter, length and quantity depend on the flange size and pressure class. Confirm them against the flange standard or the joint drawing rather than estimating.

What to include in your order

  • grade of studs or bolts and matching nuts
  • diameter, thread and length
  • coating or finish
  • quantity, including spares
  • certificates required

Source bolting with DE'ES CREST LIMITED

We supply stud bolts, hex bolts, nuts, washers, threaded rods and high-tensile and stainless fasteners through our pipes, valves, bolts and industrial materials service, often packaged with flanges and gaskets. See also our guide to writing an RFQ, then request a quote.

All articles