Valves control the flow of liquids and gases in piping systems. Choosing the wrong type can cause leaks, excessive wear or poor process control. This guide explains the most common industrial valve types and when each is used.
Ball valves
A ball valve uses a rotating ball with a bore through it. A quarter turn opens or closes it. Ball valves offer tight shut-off and quick operation, which makes them common in oil and gas, water and process applications.
Gate valves
A gate valve lifts a gate out of the flow path. When fully open it causes very little pressure drop. Gate valves are designed for on/off service and are not suited to throttling, which can damage the seating surfaces.
Globe valves
Globe valves move a disc towards or away from a seat. They are well suited to throttling and flow regulation, at the cost of a higher pressure drop than gate or ball valves.
Check valves
Check valves allow flow in one direction only and prevent backflow, protecting pumps and equipment. Common designs include swing, lift and dual-plate check valves.
Butterfly valves
A butterfly valve uses a rotating disc. Butterfly valves are compact and light, especially in large diameters, and are widely used in water, utilities and many process services.
Control and actuated valves
Where valves must be operated remotely or automatically, they are fitted with electric, pneumatic or hydraulic actuators. Control valves adjust flow continuously in response to a control system.
What to specify when buying valves
- valve type and size
- pressure class and end connection (flanged, threaded or welded)
- body and trim materials
- operating method (manual, gear or actuated)
- applicable standard, for example API or ASME standards
- service conditions such as temperature, fluid and any sour service
Valves are installed with flanges, gaskets and bolting, so read our guides to flanges and gaskets and stud bolts too.
Source valves with DE'ES CREST LIMITED
We supply ball, gate, globe, check, butterfly, control and actuated valves as part of our pipes, valves, bolts and industrial materials service, for oil & gas, power and industrial clients. Send your valve schedule through our quote request form.