Industrial Materials

Industrial Bearings: Selection, Replacement and Common Failure Causes

1 min read

Galvanised steel components crated for an industrial project

Bearings support rotating shafts in motors, pumps, fans, gearboxes and conveyors. A failed bearing can stop a whole production line, so getting the right replacement quickly matters.

Common bearing types

  • Deep groove ball bearings: the most common type, used in many electric motors and general machinery
  • Angular contact ball bearings: for combined radial and axial loads
  • Cylindrical roller bearings: for heavy radial loads
  • Tapered roller bearings: for combined heavy loads, for example in wheels and gearboxes
  • Spherical roller bearings: tolerate some misalignment under heavy loads
  • Mounted bearing units (pillow block and flange units) for conveyors and fans

How to identify a replacement

The simplest method is the bearing designation stamped on the bearing or listed in the equipment manual. It describes the type, size and features such as seals or clearance. If the marking is worn, measure the bore, outside diameter and width, and note whether the bearing is sealed or shielded.

Common causes of bearing failure

  1. Poor lubrication: too little, too much or the wrong lubricant
  2. Contamination from dust or water entering the bearing
  3. Misalignment of shafts and couplings
  4. Incorrect installation, such as hammering a bearing into place
  5. Overloading or vibration

Most of these are prevented by good preventive maintenance: correct lubrication, alignment checks and monitoring of temperature and vibration.

Keep critical spares

Bearings for critical motors and pumps are good candidates for stocking on site. See spare parts planning for supply continuity.

Bearings from DE'ES CREST LIMITED

We supply bearings, couplings, seals, belts and chains through our MRO and industrial supplies and electrical and electromechanical supplies, with maintenance support for manufacturing and industrial clients. Related reading: how to select industrial motors and pumps. Send the bearing designation through our quote request form.

All articles